documents

NVELOP Documents

Find all the NVELOP documentation you need, from sell sheets, details and technical specs to brochures and other literature.

Details

Introduction

Detail 1.0 - Continuous air & vapor barrier detail guide

Detail 1.1 - NVELOP roof assembly options

Detail 1.2 - Roof vapor retarder

Detail 1.3 - Minimum insulation R-values

Wall Assembly Types

Detail 2.1 - Stud wall cavity & exterior insulation

Detail 2.2 - CMU or concrete wall with exterior insulation

Detail 2.3 - Stud wall with stud-cavity insulation only

Detail 2.4 - CMU or concrete wall without wall insulation

Detail 2.5 - Stud wall with non-nailable exterior insulating sheathing

Detail 2.6 - Stud wall with nailable exterior insulating sheathing

Detail 2.7 - Stud wall with insulated membrane and WRB on insulation

Detail 2.8 - CMU or concrete wall with insulated membrane and WRB on insulation

Detail 2.9 - Stud wall with un-insulated membrane on exterior side

Detail 2.10 - CMU or concrete wall with un-insulated membrane on exterior side

Detail 2.11 - CMU or concrete wall with insulated membrane on interior side

Detail 2.12 - CMU or concrete wall with un-insulated membrane on interior side

Roof-to-wall Tie-in Details

Detail 3.1 - Tie-in details for parapet or low roof edges

Detail 3.2 - Tie-in Sure-Seal EPDM with CCW 705 membrane

Detail 3.3 - Tie-in Sure-Weld TPO with CCW 705 membrane

Detail 3.4 - Tie-in Sure-Flex PVC with CCW 705 membrane

Detail 3.5 - Tie-in Sure-Seal EPDM with Barriseal or Barritech

Detail 3.6 - Tie-in Sure-Weld TPO with Barriseal or Barritech

Detail 3.7 -Tie-in Sure-Flex PVC with Barriseal or Barritech

Detail 3.8 - Roof vapor barrier tie-in with wall membrane barrier

Detail 3.9 - Roof vapor barrier tie-in with wall fluid-applied barrier

Detail 3.10 -Low roof to upper story wall tie-in

Universal Details

Detail 4.1 - Shelf angle - self-adhered AVB flashing

Detail 4.2 - Shelf angle - fluid-applied AVB flashing

Detail 4.3 - Window head and sill flashing - option A

Detail 4.4 - Window jamb flashing - option B

Detail 4.5 - Window head and sill flashing - option B

Detail 4.6 - Window jamb - option B

Detail 4.7 - Self-adhering AVB - sheathing joints and ties

Detail 4.8 - Fluid-applied AVB - sheathing joints and ties

Detail 4.9 - Stud wall joint greater than one inch (25mm)

Detail 4.10 - Conduit penetration flashing

Below Grade Details

Detail 5.1 - Floor slab - waterproofing and vapor proofing

Detail 5.2 - Positive side waterproofing - wall and slab tie-in using MiraPLY

Detail 5.3 - Positive side waterproofing - MiraPLY tie-in splice

Detail 5.4 - Negative side waterproofing - wall and slab MiraPLY tie-in

Detail 5.5 - Negative side waterproofing - MiraPLY splice options

Detail 5.6 - Slab on grade

Detail 5.7 - Ground floor - slab-on-grade with foundation wall

Detail 5.8 - Basement - foundation and floor wall tie-in

Detail 5.9 - Wall flashing at top of foundation

Detail 5.10 - Negative side waterproofing - MiraDRAIN splice

Detail A - CCM building envelope table of contents

See Warranty Details

Protect your building envelope with the industry’s only single-source tie-in warranty.

See Options

Get in Touch

Discover how we can customize a solution to meet your building envelope needs.

Learn More